P11X copper external thread exhaust valve is a compact automatic exhaust valve with a brass valve body and external thread interface, designed specifically for discharging free air in liquid pipeline systems. It automatically controls the opening and closing of a single exhaust port through the lifting and lowering of an internal floating ball, with a simple structure and sensitive response. Copper material provides excellent corrosion resistance and thermal conductivity, and the external thread connection makes installation and disassembly extremely convenient. It is an economical and practical accessory for local exhaust and prevention of gas blockage on small-diameter pipelines or equipment. Widely used at the top of heating radiators (radiators), small solar collection systems, electric water heaters, wall mounted boilers, circulation pump outlets, and the highest point of small-diameter pipelines or equipment such as air conditioning chilled water pipelines in homes and commercial buildings. Mainly used for automatically discharging accumulated air, ensuring smooth circulation and stable heat exchange efficiency in small water systems.P11X Copper External Thread Exhaust Valve Product Drawing Features:1. Brass valve body is corrosion-resistantThe valve body is made of brass casting, which has good resistance to corrosion and chloride ion erosion, and is not easy to rust. It is suitable for domestic hot water, cold water, and some neutral chemical media.2. Convenient external thread connectionThe interface is a standard external thread (usually G1/2 ", G3/4" or NPT thread), which can be directly screwed into the reserved interface of pipelines or equipment, and can be installed flexibly without the need for additional flanges or connectors.3. Automatic floating ball exhaustBuilt in hollow copper or stainless steel floating ball, using buoyancy principle to automatically open and close the exhaust port. When there is gas in the pipeline, the float ball descends and opens the exhaust. After filling with water, it rises and closes, achieving fully automatic operation.4. Compact structure and reliable sealingThe overall design is compact and lightweight, occupying minimal space. The exhaust port seal is usually made of heat-resistant rubber (such as NBR) to ensure tightness when closed and prevent liquid leakage.5. Economical, practical, and easy to maintainLow cost, it is a cost-effective solution to solve local gas blockage problems. If maintenance is required, the valve cap can be easily unscrewed for internal cleaning or replacement of floating balls and seals.

ARVX stainless steel micro vent valve is a precision automatic valve made of all stainless steel, specially designed to continuously and automatically discharge micro amount of dissolved gas slowly separated out from liquid pipeline system. It does not process a large amount of free air, but automatically opens the tiny exhaust port under the system pressure through the precise ball (or displacer) mechanism to continuously discharge the trace gas accumulated at the high point of the pipe, so as to effectively prevent the formation of air bag, reduce air resistance, optimize the system efficiency, and protect the pump and instrument from cavitation. Its all-stainless steel construction ensures excellent corrosion resistance and hygiene. It is mainly used in closed circulating water system, solar heating system, precision industrial cooling system, food and pharmaceutical process pipeline, HVAC system and high-rise building water supply network and other occasions with high requirements on system efficiency, tightness and material cleanliness. It is usually installed at the local highest point of the system or near the outlet of the heat exchanger and pump, as the key auxiliary equipment to prevent the accumulation of trace gas and ensure the continuous and efficient operation of the system.Product Drawing of ARVX Stainless Steel Trace Exhaust ValveFeatures:1.All stainless steel corrosion resistant structureThe valve body, internal float ball, spring and other core parts are all made of 304 or 316 stainless steel with no corrosion risk. They are applicable to drinking water, high purity water, chemicals and corrosive media.2.Continuous micro automatic exhaustIt is specially optimized for discharging the dissolved gas slowly separated out from the system during operation. The exhaust aperture is small (generally ≤ 2mm), and the exhaust action is smooth and continuous without affecting the normal working pressure of the system.3.High sensitivity and tight sealingPrecision small ball (or displacer) and lever mechanism are also sensitive to the accumulation of a very small amount of gas. Bubble level sealing is achieved by relying on system pressure or auxiliary springs when closing to ensure zero leakage.4.Compact design and high pressure adaptabilitySmall and compact structure, extremely low installation space requirements. Stainless steel allows for higher operating pressures (e.g. PN16, PN25, PN40) and wider temperature ranges.5.Easy maintenance and high reliabilityThe upper cover is typically unscrewed for quick inspection of the inside or replacement of seals such as O-rings. Simple and reliable mechanical structure ensures long-term maintenance-free operation and long service life.

CARX compound quick exhaust valve is a high-performance automatic valve integrating high-speed mass exhaust, continuous trace exhaust and quick air admission functions. The composite air valve is based on the principle of buoyancy effect of water on stainless steel float ball. When the water level of the exhaust valve rises, the float ball will automatically float under the buoyancy effect of water until the valve clack contacts the sealing surface of the valve seat seal ring at the exhaust port. When the buoyancy increases to more than the required specific pressure of the sealing surface, the exhaust port will be automatically closed. The valve is optimized for the gas management requirements of the pipeline system in different stages such as water filling, operation and emptying. The composite double-port structure is adopted, which can realize the combination of rapid gas throughput and precise control, effectively prevent the hazards of pipeline air resistance, water hammer and negative pressure, and ensure the safe, efficient and stable operation of the system under various working conditions. Widely used in municipal water supply network, large building water supply system, HVAC circulating system, industrial cooling water system, fire pump room and long-distance water transmission project pipeline highest point or key node. It is especially applicable to the occasions with frequent start and stop of the system, easy to produce water hammer or negative pressure, and high exhaust efficiency requirements. It is one of the core equipment to ensure the smooth and safe operation of the fluid transmission system.CARX Composite Exhaust Valve Product Diagramfeature 1.Compound double-port high-efficiency exhaustCombination design of high flow main exhaust port and micro continuous exhaust port. The main exhaust port can quickly discharge a large amount of free air filled with water or gathered in the pipeline; Trace vent can automatically and continuously discharge the dissolved gas slowly separated out from the system during operation, and the exhaust process is comprehensive and efficient. 2.Quick response and instantaneous air admissionThe main valve port is of lightweight design and sensitive response. When the pipeline system generates negative pressure, it can be instantaneously opened and suck in a large amount of air, quickly balance the pressure inside and outside the pipeline, and effectively prevent the pipeline from being sucked, the interface from being damaged or the pump body from cavitation. 3.Wide material selection and strong adaptabilityThe valve body can be made of nodular cast iron (lined with epoxy resin) or stainless steel according to the working conditions, and the seals can be made of NBR, EPDM and other materials, so that it can adapt to various application scenarios such as common clean water, circulating cooling water and slightly corrosive medium. 4.Optimized flow path and high tightnessInternal flow passage is optimized by fluid dynamics, with small exhaust resistance and large flow capacity. The sealing pair is designed accurately to ensure reliable sealing under frequent opening and closing and pressure fluctuation, so as to achieve long-term zero leakage. 5.Robust structure and easy maintenanceCompact and reasonable overall structure design and reliable operation. The upper cover is typically designed to be removable for fast internal inspection, cleaning or replacement of wearing parts, reducing maintenance costs and downtime.

CARX stainless steel fast inlet and exhaust valves are high-performance composite valves manufactured from all stainless steel and are designed for piping systems with stringent requirements for corrosion resistance, sanitary ratings, and fast response. It integrates high-speed exhaust, continuous micro exhaust and instantaneous large flow air suction functions, which can quickly exhaust a large amount of air when the pipeline is filled with water, automatically exhaust dissolved gas when the system is operating, and instantaneously suck in sufficient air when the system generates negative pressure. The whole process is automatically completed, effectively guaranteeing the operation efficiency of the system and preventing water hammer and vacuum deformation of the pipeline. Widely used in food and beverage, pharmaceutical, bioengineering, fine chemical, seawater desalination, high purity water systems, ship ballast tanks and other corrosive or high sanitary standard working conditions of the pipeline system. It is especially applicable to critical pipe sections with frequent system startup and shutdown, easy to produce negative pressure or air resistance, and is an important component to ensure process safety and fluid transmission efficiency. CARX Stainless Steel Quick Inlet and Exhaust Valve Product DrawingFeatures:1.All stainless steel corrosion resistant structureThe valve body, float ball, lever and connecting piece are all made of 304/316 stainless steel, with excellent corrosion resistance and corrosion resistance, suitable for drinking water, chemicals, seawater and media with high sanitary requirements.2.Compound fast intake and exhaustThe main exhaust port is designed as a large-flow channel, which can realize high-speed suction and discharge of air, with short response time; The micro vent provides continuous removal of dissolved gases evolved during system operation.3.High tightness and reliabilityThe sealing surface adopts high-precision grinding or soft sealing structure to ensure zero leakage of the valve under frequent opening and closing and high differential pressure working conditions, with long service life.4.Wide temperature range and high pressure adaptabilityStainless steel material combined with high temperature resistant seals (such as EPDM and fluororubber) can adapt to - 20 ℃ - 150 ℃ medium temperature and higher working pressure (such as PN25 and PN40).5.Compact structure and easy maintenanceThe overall modular design allows quick removal of the upper cover for internal inspection, cleaning or replacement of parts, and is ideal for maintenance in clean or sterile environments.

CARX Stainless Steel Composite Quick Exhaust Valve is a high performance composite valve manufactured from all stainless steel designed for piping systems with stringent requirements for corrosion resistance, sanitary ratings, and exhaust speeds. It integrates the functions of fast and large flow exhaust, continuous trace exhaust and instantaneous air suction. Its optimized flow passage and lightweight moving parts ensure the extremely fast response when the pipeline is filled with water or the working condition changes, effectively preventing the hazards of air resistance, water hammer and negative pressure, and ensuring the safe and efficient operation of the system under severe working conditions. It is dedicated to food and beverage processing, biopharmaceuticals, fine chemical industry, seawater desalination, ship ballast system, high-purity water preparation and auxiliary circuit of nuclear power station and other industries with high requirements on material cleanliness, corrosion resistance and system protection. It is especially applicable to key pipeline nodes with large flow, high lift, frequent start-stop or fierce pressure fluctuation, and is the core component to ensure safe, stable and efficient operation of high-value process system. Stainless Steel Composite Quick Exhaust Valve Product Drawing feature 1.All stainless steel corrosion resistant structureThe valve body, bonnet, float ball and internal components are all made of 304/316 stainless steel, with excellent chemical corrosion resistance, electrochemical corrosion resistance and erosion resistance, suitable for drinking water, high-purity media, chemicals and seawater and other harsh environments. 2.Compound fast exhaust mechanismLarge bore main exhaust port and independent micro exhaust port are adopted. The main exhaust port is specially optimized for exhausting a large amount of free air at high speed, significantly shortening the system water filling or exhaust time; The micro vent continuously discharges the dissolved gases evolved during operation. 3.High-speed response and instantaneous air admissionLightweight design of moving parts, low inertia and extremely short response time. When the system generates negative pressure, it can be instantaneously opened to suck in a large amount of air, quickly balance the pressure, and effectively prevent pipe deformation or equipment cavitation. 4.High tightness and wide temperature and pressure adaptabilityThe sealing pair adopts metal hard seal with precision grinding or high performance elastic seal to ensure zero leakage under frequent opening and closing and high pressure fluctuation. It can adapt to higher working pressure (PN16-PN40) and temperature range (- 20 ℃~150 ℃). 5.Sanitary design for easy maintenanceThe internal and external surfaces are polished (electrolytic polishing is optional), meeting the hygiene standards of food, pharmaceutical and other industries. The structure adopts modular design, and the upper cover can be quickly opened, which is convenient for CIP and maintenance.

P4X air supply and exhaust valve is an automatic control valve designed to automatically discharge accumulated gas in liquid pipeline systems and quickly suck in air when negative pressure is generated in the system, preventing pipeline blockage or negative pressure damage and ensuring safe and stable operation of the system. This valve usually adopts a floating ball or diaphragm structure, which can automatically open and close according to the pressure and liquid level changes in the pipeline, achieving dual functions of exhaust and replenishment. Widely used in water supply and drainage networks, HVAC systems, fire water supply systems, industrial circulating water systems, irrigation projects, and pump station water supply pipelines, especially suitable for: continuously discharging accumulated gases at the highest or local high points of pipelines, long-distance water supply pipelines, preventing negative pressure suction and collapse of pipelines when pumps stop, quickly discharging air during system filling or initial operation, ensuring smooth system start-up.Product diagram of p4x air supply and exhaust valve Features:1. Automatic exhaust and replenishment: When the volume of air in the pipeline accumulates, the exhaust is automatically turned on, and when the system generates negative pressure, it quickly sucks in air to maintain pressure balance.2. High efficiency exhaust with large displacement: The exhaust diameter is large, which can quickly discharge a large amount of air and improve the system's water filling and operating efficiency.3. High sensitivity response: Adopting a precision floating ball or elastic diaphragm structure, it responds quickly to pressure changes and opens and closes accurately and reliably.4. Leak proof sealing design: After exhaust, it automatically resets and tightly seals to prevent liquid leakage, ensuring system cleanliness and safety.Compact structure and easy installation: With a small size, it can be directly installed at high points or specific positions in pipelines, without the need for external power, and easy maintenance.

QB1 automatic single port exhaust valve is a structurally simplified, economical and practical basic automatic exhaust valve designed specifically for discharging free air accumulated at local high points in liquid pipeline systems. It automatically opens the exhaust through a single exhaust port and a built-in float mechanism when the pipeline is filled with water or gas accumulates, and automatically closes when the water level rises, effectively eliminating small airbags, preventing air resistance, and ensuring smooth system flow. Its design highlights reliability and economy, making it an entry-level preferred solution for solving conventional pipeline gas problems. Mainly used for heating systems (radiator high points), small solar hot water systems, indoor water supply branches, industrial cooling devices and other occasions where pipeline pressure is stable, gas production is not large, and only basic exhaust function is required in buildings. It is a commonly used and effective accessory for solving local air blockages and improving system circulation efficiency.QB1 Automatic Single Port Exhaust Valve Product DiagramFeatures:1. Single port automatic exhaust structureOnly one exhaust port is provided, and its opening and closing are directly controlled by the buoyancy of the floating ball. The structure is simple, the action is direct and reliable, and it can automatically discharge the free air gathered at the high points of the pipeline.2. Economical practicality and high cost-effectivenessSimplified structure, fewer components, and low manufacturing costs provide a highly cost-effective solution for basic exhaust needs that do not require composite functions.3. Compact and compact, with flexible installationSmall in size, lightweight, with extremely low installation space requirements, it can be easily installed at any local high point or location in the pipeline system that requires exhaust.4. Easy maintenance and stable operationThe internal structure is simple and the failure rate is low. If maintenance is required, the upper cover can be easily opened for inspection or replacement of the sealing float ball, with low maintenance costs.5. Wide adaptability to mediaThe standard model valve body is mostly made of cast iron or copper, sealed with nitrile rubber (NBR), and can be widely used in neutral liquid systems such as cold water, hot water, and air conditioning circulating water.

QB2 Automatic Dual Port Air Vent is an automatic valve with classic structure and reliable performance. It works together through two independent exhaust ports (usually one large-diameter main exhaust port and one small-diameter auxiliary exhaust port) to realize automatic exhaust of free air and separated gas in the pipeline system. It can quickly exhaust a large amount of air when the pipeline is filled with water, continuously exhaust trace gas when the system is operating, and automatically suck in air when the system generates negative pressure, so as to effectively prevent air resistance, ensure the water transmission efficiency of the system and protect the pipeline safety. Widely used in building water supply system, HVAC circulating water system, fire water supply network, industrial circulating cooling water system and the highest point or local bulge of regional water supply pipeline. It is especially applicable to the conventional water system requiring automatic and efficient gas removal, but not requiring high protection requirements for extreme pressure fluctuation such as waterproof hammer, and it is the basic exhaust equipment to ensure smooth operation of the pipeline.Product Drawing of QB2 Automatic Double-port Exhaust Valve Features:1.Two-port collaborative automatic exhaustThe main and auxiliary exhaust ports are designed. The main exhaust port is used to quickly discharge a large amount of free air filled with water or accumulated in the pipeline; The auxiliary exhaust port is used to continuously discharge the slowly separated trace gas during the stable operation of the system, and the exhaust process is efficient and automatic.2.Automatic air supplement for negative pressure preventionWhen the pressure in the pipeline drops to form negative pressure, the main exhaust port will be quickly opened to suck in the external air, effectively avoiding the pipeline from being sucked or generating water hammer, and ensuring the safety of the system structure.3.Simple structure and reliable operationThe mechanical structure combining lever and float ball (or displacer) is generally adopted inside, with direct action principle, solid and durable parts, relatively loose requirements for water quality and stable and reliable operation.4.Good adaptability under wide working conditionsThe valve body can be made of nodular cast iron (lined with anticorrosive coating) or stainless steel. NBR or EPDM rubber can be selected for the sealing elements according to the medium temperature, which can adapt to various media such as clean water, cooling water and slightly treated sewage.5.Easy installation and maintenanceThe overall structure is compact, and most interfaces are standard flanges or threads. The upper cover is usually removable, convenient for daily inspection, internal cleaning and replacement of wearing parts, with low maintenance cost.

CARX Combined Air Release Valve is an intelligent valve that integrates high-speed exhaust, micro exhaust, and automatic air supply functions, designed specifically to eliminate gas resistance and negative pressure hazards in pipeline systems. It adopts a unique dual floating ball (large floating ball and small floating ball) composite structure, which can discharge a large amount of air at high speed when the pipeline is filled with water. The system continuously discharges trace gases that precipitate during operation, and quickly inhales air when negative pressure is generated in the system. The entire process is fully automatic, effectively ensuring the safety and efficiency of the pipeline system operation. Mainly used in long-distance water supply pipelines, municipal water supply networks, boiler heating systems, industrial circulating water systems, fire water supply systems, and pump stations, it is a key equipment for solving pipeline air blockage, water hammer, and negative pressure problems, ensuring that the system is always in the best water supply efficiency and safety state.CARX Combined Air Release Valve Product Diagram feature 1. Dual stage composite exhaust structureThe large exhaust port is used to discharge a large amount of free air at high speed during water filling; The small exhaust port is used to automatically and continuously discharge trace amounts of dissolved gases during system operation, ensuring thorough and efficient exhaust.2. Automatic air replenishment to prevent negative pressureWhen the pipeline system stops pumping or generates negative pressure during drainage, the valve automatically opens to suck in air, preventing the pipeline from being sucked in and protecting the structural safety of the system.3. High sensitivity and reliabilityAdopting stainless steel floating ball and precision lever mechanism, it is sensitive to pressure and water level changes, accurate in opening and closing, reliable in sealing performance, and achieves zero leakage.4. Wide adaptability to working conditionsThe valve body can be made of ductile iron (lined with epoxy resin) or stainless steel material, and the sealing components can be selected from NBR, EPDM, etc. It is suitable for various media such as clean water, drinking water, and mild sewage.5. Easy maintenance, sturdy structureThe valve body structure is compact and reasonable, with modular design of internal components for easy inspection and maintenance; The overall cast shell is pressure resistant and durable, with a long service life

SCAR composite sewage exhaust valve is a high-performance exhaust valve specially developed for sewage, wastewater, and suspended solids medium pipeline systems. It has undergone comprehensive reinforcement design on the basis of standard composite exhaust valves, ensuring reliable high-speed exhaust, micro exhaust, and automatic air replenishment functions even under harsh working conditions containing fibers, particles, and corrosive components through anti blocking structures, enhanced corrosion-resistant materials, and optimized gas-liquid separation chambers. This effectively solves the problems of air resistance, air hammer, and negative pressure damage in sewage pipelines, and guarantees the continuous and stable operation of the system. Specially applied to the highest point or local protrusion of pipeline systems containing solid impurities and corrosive gases, such as municipal sewage treatment plants, industrial wastewater pipelines, mine drainage systems containing slag slurry, food processing wastewater pipelines, and building and domestic sewage risers. It is an essential key equipment for ensuring smooth exhaust and safe operation of such complex medium pipeline systems.SCAR composite sewage exhaust valve product diagram Features:1. Exclusive anti blocking designBy adopting a large aperture exhaust port, installing a built-in filter or anti entanglement cover, and optimizing the movement path of the floating ball, it effectively prevents impurities such as fibers, hair, and solid particles in the sewage from entering the valve chamber or entanglement mechanism, and eliminates blockages.2. Strong corrosion resistance and pollution resistanceThe main overcurrent components of the valve body are made of stainless steel (such as 304, 316) or lined with special engineering plastics, and the seals are made of EPDM or fluororubber, which can withstand the corrosion and adhesion of hydrogen sulfide, organic acids, and various chemical substances in sewage.3. Efficient gas-liquid separation structureThe valve chamber is designed with a flow guide and buffer structure, which can promote gas-liquid separation, ensure that the medium entering the exhaust mechanism is relatively clean, reduce the influence of impurities on the precision float and sealing pair, and improve the reliability of the operation.4. High displacement and fast responseIn response to the possibility of higher gas production from sewage, the exhaust channel has been optimized to provide greater exhaust capacity; Simultaneously using weighted or specially shaped floating balls to ensure sensitive response to changes in medium density or viscosity.5. Easy to maintain and cleanValves are usually designed with detachable covers or inspection ports, which facilitate quick opening for internal flushing, inspection, and replacement of vulnerable parts, reducing maintenance difficulty and time costs in harsh environments.